User guide

Installing the i2050 Software Phone 35
Internet Phone User Guide Nortel Networks
Step 4: Run the i2050 Configuration Tool
You configure the i2050 Software Phone using the i2050 configuration utility.
To start the configuration utility, select the following from the Start menu:
Start>Programs>Nortel Networks>i2050 Software Phone>Configuration
Tool
The configuration utility has nine tabs listed below. You will need to check your
settings for the tabs shown in boldfaced.
• Communications Server
• Select Sound Devices
• ServerType
• QoS
• Hardware ID
• Advanced Audio
• Listener IP
• Trace
• About
Configuration Tool Tab - Communications Server
If your site uses DHCP:
1. Select the Obtain server address automatically option.
If your site is not using DHCP:
1. Select the Use the following server address information option.
Enter the IP address and port number of the communications server provided
by your system administrator.
Note: To use DHCP, you site needs a DHCP server with communications
server IP address values programmed as per the i2004.
Note: Using DHCP may not be appropriate for mobile users. These users
commonly want to connect to their office communications server rather
than the local office server.