User guide

Installing the i2050 Software Phone 39
Internet Phone User Guide Nortel Networks
Configuration Tool Tab - Advanced Audio
You can use this screen to override the communications server defined values.
Changing the values on this screen should be considered a last resort if audio
quality issues are encountered.
Table 5 Advanced Audio
Attribute
Description
Use
Communication
Server values
The i2050 Software Phone uses the values assigned by
the communications server.
This is the normal mode of operation.
Override
Communication
Server Values
In very rare cases where audio quality is adversely
affected by network performance for a few clients, these
values may be able to achieve a workable balance of
quality.
Configuration Tool Tab - Listener IP
This screen identifies the IP addresses and ports where the i2050 Software
Phone is listening for UNIStim traffic. You can use this screen to override the port
assignments when there is a conflicting application on the computer.
Table 6 Listener IP
Attribute Description
Use all addresses The i2050 Software Phone listens to the IP addresses
on all of the network interface cards on the PC for
UNIStim traffic.
This is the normal mode of operation.
Port This value may require adjustment if another
application on the computer is using the same port.
The two applications can co-exist by moving the port or
IP address the i2050 Software Phone is listening to.
Use specific address Using a specific address may be useful in cases where
there is more than one Ethernet card and an
application conflict exists.
Note: This screen is intended for expert users only.
Note: This screen is intended for expert users only.