User guide

Using Network Services with the i2004 or i2050 Phone 76

Internet Phone User Guide Nortel Networks

Ring Again

In busy offices, it can be difficult to reach your party without getting a busy signal.

Ring Again (also known as Automatic Call Back) will notify you when the number

you are trying to call becomes available (see Figure 35).

While on a "busy" call

1. When you hear the "busy signal", press RINGAGN. If the switch allows Ring Again activation

against the remote party, then the line will be released and the feature will be activated.

2. Your display will identify that the Ring Again feature is active. You may cancel the feature by

pressing the CNCLRA softkey.

When the line becomes available, a tone through the speaker will notify you,

prompting action to complete the call.

When You Receive Ring Again Notification

1. To call the remote party, perform one of the following actions: press the CALL softkey, lift the

HANDSET, press the HANDSFREE key, or press a LINE key. The network will connect you

to the party that you have been trying to reach and you will hear the ring back tone.

Figure 35

6135559870

spect

RingAgn

6155555654

6135559870

10/01 11:20am

Busy...

6135559870

Inspect 0Calls CnclRa More...

10/01 11:21am

Ring Again active:

6155555654

6135559870

Call Exit

6155555654

6135559870

10/01 11:40am

Ring Again

6135559870

Inspect Confer Transfr

6155555654

6135559870

10/01 11:40am

Calling...

When your party becomes available