User's Manual

Security parameters 149
Reference for the Business Policy Switch 2000 Management Software
SecurityAction Actions performed by the software when a violation occurs
(when SecurityStatus is enabled). The security action
specified here applies to all ports of the switch.
A blocked address causes the port to be partitioned when
unauthorized access is attempted. Selections include:
• noAction: Port does not have any security assigned to it, or
the security feature is turned off.
• trap: Listed trap.
• partitionPort: Port is partitioned.
• partitionPortAndsendTrap: Port is partitioned and traps are
sent to the trap receive station.
• daFiltering: Port filters out the frames where the
destination address field is the MAC address of
unauthorized Station.
• daFilteringAndsendTrap: Port filters out the frames where
the desitnation address field is the MAC address of
unauthorized station. Traps are sent to trap receive
station(s).
• partitionPortAnddaFiltering: Port is partitioned and will
filter out the frames with the destination address field is the
MAC address of unauthorized station.
• partitionPortdaFilteringAndsendTrap: Port is
partitioned and will filter out the frames with the destination
address field is the MAC address of unauthorized station.
Traps are sent to trap receive station(s).
Note: “da” means destination address.
CurrNodesAllowed Current number of entries of the nodes allowed in the
AuthConfig tab.
MaxNodesAllowed Maximum number of entries of the nodes allowed in the
AuthConfig tab.
PortLearnStatus Set of ports where auto-learning is enabled.
CurrSecurityLists Current number of entries of the Security listed in the
SecurityList tab
MaxSecurityLists Maximum entries of the Security listed in the SecurityList tab.
Table 54 General tab items (continued)
Items Description