User's Manual

Configuring and graphing the switch 55
Reference for the Business Policy Switch 2000 Management Software
Table 19 describes the Base Unit Info tab items.
Stack Info tab
The Stack Info tab provides read-only information about the operating status of
the stacked switches and whether or not the default factory settings are being
used. This tab is enabled for a stack of Business Policy Switches or a mixed stack
of BayStack 450, and BayStack 410 and Business Policy switches.
To open the System tab:
1 Select the chassis.
2 From the shortcut menu, choose Edit > Chassis.
The Chassis dialog box opens with the System tab displayed (Figure 22).
3 ClicktheStackInfotab.
The Stack Info tab opens (Figure 24).
Table 19 Base Unit Info tab items
Item Description
Type The switch type.
Descr A description of the switch hardware, including number of ports and
transmission speed.
Ver The switch hardware version number.
SerNum The switch serial number.
LstChng The value of sysUpTime at the time the interface entered its current
operational state. If the current state was entered prior to the last
reinitialization of the local network management subsystem, the value
is zero.
AdminState Administrative state of the switch. Select either
enable or reset.
Note: In a stack configuration,
Reset only resets the base unit.
OperState The operational state of the switch.
Location Type the physical location of the switch.