User's Manual

9
NOTE: Each time auto scan is performed the previously preset channels will be
overwritten by the new FM stations detected.
Setting FM Stations Manually
- If the “Preset” icon is displayed in the screen, press the  button to clear it.
- Press the
 button to increase the FM frequency. To fast forward scan, press and hold
the
 button. The unit will stop at each FM Station detected.
- Press the
 button to decrease the FM frequency. To fast rewind scan, press and
hold the
 button. The unit will stop at each FM Station detected.
- To store each station into memory, press the XII button. “Memory” will be displayed.
- To select a different channel number, use the
 or the  button.
- Press the XII button to store this FM frequency in the selected channel number.
(“Memory” will clear from the screen.)
Using the Preset Channel
- Press the
 button to display “Preset”.
- Use the
 button to select the next preset station and use the  button to select
the previous preset station.
Recording a FM Radio Station
- Press the
/EQ/2 button to start recording.
- Press the XII button to pause and unpause recording.
- Press the
 button to stop recording.
NOTE: The volume is not controlled during recording.
Line-in Encoding
Press the
mode button and use the  or the  button to highlight the Line-in icon
as shown.
Press the XII button to confirm and enter the Line-in mode.
- Use the supplied Line-in cable to connect your DAP with the Audio out jack of another
audio player such as a CD player.
- Press the /EQ/2 button to start recording. Then play the desired track from the other
source.