Instruction manual

85
VSIB for Thai, Korean or Chinese Languages
The VSIB is a bit-mapped display device that can display Thai, Korean, or Chinese characters. This device works in
conjunction with the VSI-Pro. A special cable is connected between the VSI-Pro and the VSIB so all on-screen
programming is done via the VSIB but the controls and menus are the same as the VSI-Pro. Therefore after connec-
tion, the programming will be identical to this manual. The VSIB must be ordered independently for any of the above
supported languages and the language must be specified.
Figure 211: VSIB Connection Cables
Figure 210: VSIB Front Panel
Figure 209: VSIB Rear Panel
Serial Input Power Video Input Video Output
Figure 208: VSI-Pro Front Panel
The pin-out for the VSIB between the VSI-Pro and the VSIB
is as follows:
Figure 213: Pin-Out for VSIB to VSI-Pro
Figure 212: Cable Connection to VSIB
VSIB ( DB-9M ) VSI-Pro ( DB-9M )
TXD 3 2 RXD
RTS 7 8 CTS
GND 5 5 GND
Disconnect the standard
VSI-Pro and plug its
cable into the female
connector of the Triport.
Use the BNC con-
nectors of the
VSIB for your
Video Input &
Output
APPENDIX G VSIB INSTALLATION
VSI-Pro Max POS / Cash Register Interface