Instruction manual

90
Figure 223: VSI-Pro Max Connections with TCPIP 232 Adapter
TCPIP 232 ADAPTER
Interfacing the VSI-Pro Max to the POS / Cash Register TCP/IP network requires the TCPIP 232 Adapter along with the
VSI-Pro Max. The IP address of the cash register is programmed into the TCPIP 232 Adapter via on-screen programming.
The Cash Register LAN cable is plugged into the adapter and the supplied additonal LAN cable is then plugged into the
Cash Register. Therefore this DOES NOT require an additional network port for the cash register interface or any host
programming of the router or switch. The TCPIP232 Adapter is AutoSense so will automatically configure to the router or
POS / Cash Register LAN port.
Figure 221: Front of TCPIP 232 Adapter Figure 222: Rear of TCPIP 232 Adapter
The pin-out between the TCPIP 232 Adapter and the VSI-Pro Max is as follows:
Figure 224: Pin-Out for TCPIP 232 Adapter to VSI-Pro Max
VSI-PRO
RG-59U
CAMERA
DC CABLE
WAVE TRANSFORMER
POS / CASH
REGISTER
TCPIP 232
ADAPTER
RG-59U
MONITOR
TCPIP232 ADAPTER APPENDIX M
VSI-Pro Max POS / Cash Register Interface
CAT 5 LAN
Router or Switch
RS-232
TCPIP (DB-9M) VSI-Pro Max (DB-9M)
RXD 2 RS-232 3 TXD
TXD 3 RS-232 2 RXD
GND 5 5 GND
TCPIP232 RJ45 VSI-Pro Max RJ45 DB9(M)
4 - A+ RS-485 4 - A+ RS-485 4 - A+ RS-485
5 - B- RS-485 5 - B- RS-485 6 - B- RS-485