4 Camera Passive Hub Installation Manual

TwistPlex

UTP Product Line

UTP 4X1500

4 Camera Passive Hub

Installation Manual

PAGE 1
TwistPlex UTP Product Line UTP 4X1500 4 Camera Passive Hub Installation Manual
PAGE 2
Step 1 Remove the two countersunk screws from the rear of the metal case using a cross head screwdriver. Step 4 Top and back cover are separated as shown below. Top Cover Base Cover Step 2 Hold onto the main case assembly with one hand supporting the top cover. Step 3 Press slightly on the back cover using the left hand thumb and slide the back cover using the right hand. Step 5 Step 6 Use the back cover as a template to mark the holes at the location required to mount the hubs.
PAGE 3
Step 7 Slide the top cover onto the back cover with the slot on Step 10 Use the thumb to press the orange terminal and insert the top cover hook on the catch of the back cover. the UTP cable. Step 8 Screw back the two countersunk screw to secure the top cover on to the back cover. Installation complete.
PAGE 4
UK and Western Europe AVE Multiview Unit 1C, The Potteries, Woodgreen Road, Waltham Abbey Essex, EN9 3SA, UK Tel: 440-870-770-9323 Fax: 440-870-770-9363 Email: ave-uk@multiview.net Website: www.multiview.net ASIA AVE (Thailand) Co., Ltd. 217/4 Crystal Garden Soi 4 (Nanatai), Sukhumvit Rd. Klongtoey, Klongtoey Bangkok, 10110 Thailand Tel: 662-656-8231 Fax: 662-656-9554 Email: ave@avethailand.com Website : www.avethailand.