Specifications

15
POWER:
Don’t use this button. VCR power is controlled by the
internal microprocessor. The VCR will automatically
power up when 12VDC is applied to the VCR.
REC:
Use the combination of these two buttons pressed
simultaneously to manually start recording.
PAUSE/STILL
Press during the recording to pause recording. Press
during the playback to freeze the picture.
Caution: If this button is held for 6 seconds then it will
master reset the VCR and clear all the programming to
factory default.
SP/EP
Don’t use this button. Recording speed can only be
set in the onscreen programming mode.
7. IR REMOTE CONTROL