User manual

Setup
2 - 4 ADPRO FastTrace, Issue 5
2.2.1 Local Setup
When first configuring the ADPRO FastTrace for operation at a remote site, it is recommended that a local (direct)
connection is made so that camera position and alarm parameters can be conveniently checked.
Figure 2-1 shows the items needed for a direct connection. These items are:
• PC or laptop computer with a standard serial comms port and CD-ROM drive
• CD-ROM with ADPRO Video Central Lite Software - loaded onto the PC or laptop
• Null-modem cable (supplied with unit) - refer to Figure 2-2 for the cable wiring diagram if a longer cable
is needed
Figure 2-1 - Local setup configuration
Figure 2-2 - Null-modem cable wiring for local connection
COMMS 1 COMMS 2
NETWORK
USB
ALARM INPUTS ALARM INPUTS
CONTROL OUTPUTS
AUDIO SWITCHER
AUDIO
GP SERIAL 1
CAMERAS
GP SERIAL 2
PTZ
KEYBRD/PROGMR
CONFIGURATION
MON-1
1
0
P73-setup config.cdr
Serial Comms
port on PC
Comms 2
port
Null-modem
cable
Video Central
CD-ROM