User manual

Setup
2 - 8 ADPRO FastTrace, Issue 5
2.2.1.1.4 Connecting to the ADPRO FastTrace
Ensure the ADPRO FastTrace has completed its start-up checks (as indicated by the red status light going off).
• From the Connection menu, click the Connect to Site option
• Select the site named FastTrace default site and click the OK button
Accessing the ADPRO FastTrace ‘User Settings’ menu:
Setup parameters and configuration options for the ADPRO FastTrace can now be modified via the User Settings
menu.
To display the menu:
•Go to the Connection menu and click the Installer Menu option
Figure 2-3 - User Settings menu
For a new ADPRO FastTrace, a message will appear asking the user to accept the Factory Default settings. Click YES
to this question.
The menu consists of a number of major categories, some with a number of sub-categories and option choices.
Selection of a particular category can be expanded by double-clicking on the menu item.
Once the configuration is complete, all changes can be saved using the Save to FastTrace button. When saved, the
changes are uploaded to the ADPRO FastTrace memory for permanent storage.
This configuration can also be saved to a file for archival purposes, or a pre-saved configuration can be retrieved from
file for upload to the ADPRO FastTrace.