User manual

Setup
2 - 10 ADPRO FastTrace, Issue 5
2.2.2 Leaving User Settings
When changes to the setup parameters are completed, options available are:
• Save to FastTrace Changes are uploaded and stored in the ADPRO FastTrace NVRAM
permanent memory and are immediately available for use.
• Save to File Current settings are saved to file on the Video Central PC and are available for
later use.
• Load from File A pre-saved configuration file can be retrieved from the Video Central PC and
edited.
• Discard all Changes Changes are discarded and the User Settings dialog box is exited.
2.2.3 Remote Setup
First Time Setup
If a new ADPRO FastTrace is to be setup, it is recommended that the Local Setup procedure is used first. This will
enable the correct network and/or telephone configurations to be established and on-line connections tested.
To change setup parameters remotely, the ADPRO Video Central Lite will need to be connected on-line to the
appropriate ADPRO FastTrace. If the unit requiring setup has already been installed and operational, use Video
Central Lite’s Connect to Site option to establish a link.
Once connected, use the Video Central Lite Connection menu and click the Installer Menu option to modify the
ADPRO FastTrace configuration. Note that if a later version of the User Settings program is detected on the ADPRO
FastTrace, this version will be downloaded to the Video Central Lite PC before the program starts.
2.3 User Settings Menu
Setup parameters and configuration options for the ADPRO FastTrace are entered (or modified) via the User Settings
menu. On the right side of the menu are the fields and options available within a selected category.
The User is also able to Save & Load FastTrace settings using the buttons at the bottom of the User Settings screen.
By selecting the Save to File … button, the user is presented with the Save Settings dialogue box.
• Files are saved in a ‘FastTrace User Settings (*.fus)’ file format.
• Characters such as ':', '*' and '?' in the filename, for example, are invalid and will not be accepted.
• If the file already exists, the user shall be asked whether or not they wish to overwrite the existing file.
• If an error in saving occurs, such as insufficient storage space, the user will be informed of the error by a
dialogue box.
By selecting the Load from File … button, the user is presented with the Load Settings dialogue box.
• The ‘Files of type’ drop down list is displayed as default ‘FastTrace User Settings (*.fus)’.
• Select Open to open the file.
• The user will be prompted to whether or not to use the Ethernet IP settings from the file to be loaded or to
retain the current ones. The following dialogue is be displayed: