User manual

Setup
2 - 12 ADPRO FastTrace, Issue 5
2.3.1.1 Site Name
Each ADPRO FastTrace must have a unique Site ID. The maximum site ID alpha-numeric length is 9 characters. Note
that the ‘local’ Site ID entered here must match a Site ID entry in the ADPRO Video Central Lite Site List.
The default Site ID is ‘FASTRACE’.
2.3.1.2 Passwords
To control access to ADPRO FastTrace’s stored images, alarm reporting features and the setup menus, different
password types can be set to control the access level required by a particular type of user. For example, the needs of
an operator will be different to that of a system administrator.
Password control is always used when accessing the ADPRO FastTrace, this option cannot be left blank.
Each 8-character password can be associated to one of the two user access levels available:
1. Observer - using a password assigned to the Observer level will allow a connected user to query/view
the video database and select live video display.
2. CMS - using a password assigned to the CMS (Central Monitoring Station) level will provide a
connected user with Observer functionality plus the ability to query/view/release alarm
images (normal and pre-alarm) and change the setup parameters.
• The default CMS Password is ‘FT2222’
• The default Observer Password is ‘FT1111’
2.3.1.3 Date/Time Settings
To enable accurate event tracking, the ADPRO FastTrace can be set to accommodate local or regional daylight saving
time shifts when they affect the location where the ADPRO FastTrace is sited.
NOTE
When editing the Site Details in ADPRO Video Central Lite, if the Observer Password
is entered into the CMS Password field then the user will connect to the site in
Observer mode, with only Observer privileges
IMPORTANT NOTE
When the ADPRO FastTrace unit is shipped from the factory, Universal Time is
programmed in the unit and is used as the ‘current’ time. To match the ‘current’ time
to the local time at your location, change the time zone setting to the correct zone.
Changes to the value of the ‘current’ time (via ADPRO Video Central Lite) should only be
used for minor adjustments when absolutely necessary. Refer to the Warning text below.