User manual

Setup
2 - 28 ADPRO FastTrace, Issue 5
2.3.3.4 Monitor
A local monitor can be connected to the ADPRO FastTrace and used to display a number of camera views in a
sequence.
Set the Local Monitor Connected checkbox if a sequence monitor is to be used. Click the Configure button to setup
the sequence.
2.3.3.4.1 Sequence List
The list defines the sequence (order) in which camera images are presented on the monitor. The sequence list can show
up to 20 cameras and the checkbox next to the camera number will select that camera for inclusion.
2.3.3.4.2 Dwell Time
Options: Range 1 to 60
Factory Default: 2 seconds
Sequence Time is used to control the duration (in seconds) that a camera in the Sequence List is displayed on the
monitor. The Sequence Time is common to all active channels and is defined as the duration a channel (camera) is
displayed before switching to the next active channel. It can be set from 1 to 99 seconds.
2.3.3.5 Transaction Devices
A Transaction Device (for example an ATM or POS terminal) can be connected to the ADPRO FastTrace via one of
the GP Serial ports. Up to eight transaction devices can be configured.
Selecting the Transaction Devices option displays a list of available channels and any transaction device name
assigned to the channel.