User manual

Setup
2 - 32 ADPRO FastTrace, Issue 5
2.3.3.5.5.7 Flow Control
Options: Hardware, None
Default: None
Sets the type of Flow Control used to transfer data between the GP Serial interface and the Transaction Device. It can
be set to either Hardware or None.
2.3.3.5.5.8 Configure Transaction Data
Clicking the Configure Transaction Data button displays the dialog box shown below.
Selecting an unused Field number and pressing Configure allows a Name to be entered for the field via the
Transaction Data Field Name Settings dialog box.
A Transaction Data Field describes a unique piece of information that makes up a single transaction packet. The first
two fields (User ID and Transaction ID) are mandatory fields required by the ADPRO FastTrace.
Additional fields may be specified, each having a unique name. The actual field names and the associated data may
vary between equipment types and users should consult with the equipment manufacturer or the financial institution
for details or contact ADPRO Technical Support.
2.3.3.5.6 Transparent Data Port
Transparent data allows an operator to pass data from a serial device connected to Video Central to one connected to
the Data port on the ADPRO FastTrace and vice versa. (Transparent data is only available for serial RS-232.)
The first Video Central User connects to an ADPRO FastTrace with transparent data enabled. During this time the
serial port is reserved exclusively for use that User. Until that User disconnects, no other User can access transparent
data.