User manual

Safety Procedures
ADPRO FastTrace, Issue 5
WARNING INFORMATION
Installations in the United States of America and Canada
For systems installed in the United States of America and Canada the following requirement is applicable:
All equipment installations are required to be in accordance with the National Electrical Code (NEC) ANSI/NFPA 70
and the Canadian Electrical Code (CEC) Part 1, CAN/CSA C22.1.
If the power cord is not supplied with the ADPRO FastTrace, select the proper power cord according to your local
national electricity code.
USA: use a UL listed type SVT or SJT detachable power cord.
Canada: use a CSA certified detachable power cord.
Radio Interference
The ADPRO FastTrace complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The ADPRO FastTrace complies with the electromagnetic emission limit requirements of AS/NZS 3548 and EN55022
Class A. In a domestic environment this product may cause radio interference in which case the user may be required
to take adequate measures.
Static Discharge
ADPRO FastTrace system components contain electrical parts that are susceptible to damage from static discharge.
Static voltages of one (1) to thirty (30) kilovolts are common in unprotected environments.
When installing or servicing ADPRO FastTrace equipment, it is advisable to observe the following standard
precautions for handling electronic assemblies to reduce the risk of component damage:
• Minimise handling of electronic assemblies and components,
• Transport, temporarily arrange and store electronic components in recognised anti-static containers,
• Discharge any static voltage from your body before handling electronic components or wear a grounded,
Safety-Standard Approved, anti-static wrist strap while handling components, and
• Avoid handling electronic components in areas which have a floor or work-surface capable of generating a
static charge.
Internal Lithium Battery
WARNINGS
The ADPRO FastTrace contains an internal lithium battery.
There is danger of explosion if the battery is incorrectly replaced.
The battery is not user replaceable and can only be replaced by Vision Fire & Security or
their Authorised Service Representative.