User manual

Setup
2 - 44 ADPRO FastTrace, Issue 5
2.3.4.4.4 Event Triggers
Users can choose from two triggering methods to select ‘how’ a channel is activated for an alarm event. The Alarm
Logic option is used the setup the logical order to which Alarm Inputs are treated before an alarm event is declared to
be ‘valid’.
2.3.4.4.4.1 Alarm Logic
Options: When ANY input occurs, Only when ALL inputs occur
Default: When ANY input occurs
The When ANY input occurs setting will declare an alarm when any input is active (logical OR function).
Only when ALL inputs occur is used to declare an alarm only when all inputs are active (logical AND function).
2.3.4.4.4.2 Event Inputs
For the Alarm Logic to operate, one or more Alarm Inputs must be assigned. Use the Add to list button to place an
alarm input type on the list.
Select an option from the Event Input Settings dialogue box. Choose a Type and then a Source of input.
The types of Event Inputs available are:
• Alarm Input
• Activity Detection
•Transaction
The Source for an Event Input is defined by the settings in Connected Equipment / Alarm Inputs (refer to Section
2.3.3.5.7).
Transaction devices are defined in Connected Equipment / Transaction Devices (refer to Section 2.3.3.5).
2.3.4.4.5 Event Response
Once an Event has been declared, the Event Response settings are used to define the actions that will be taken in
response to the Event.
2.3.4.4.5.1 Activate Control Output
Select the checkbox to enable the Control Output assigned to this camera. Refer to Section 2.3.3.5.8.
NOTE
If the assigned Control Output number has been specified for Manual Operation, then an
error message will be displayed.