User manual

Setup
ADPRO FastTrace, Issue 5 2 - 45
2.3.4.4.5.2 Dial Out on Event
The Dial out on event option is used to define whether the ADPRO FastTrace will attempt to connect to ADPRO
Video Central Lite if and when this camera records an event.
If the Dial out only when secure checkbox is selected, the ADPRO FastTrace will only attempt a remote connection
if the unit is set into the Secure state of operation. Refer to Section 1.17.
2.3.4.4.5.3 Dial Out on Video Loss
Options: Yes, No
Factory Default: Yes
Select the Dial out on video loss checkbox if operators are to be notified if a Video Loss condition occurs on this
camera. A Video Loss alarm will occur if the camera is disconnected, or its video output fails.
2.3.4.4.5.4 Dial Out on Invalid Contrast
Options: Yes, No
Factory Default: No
Select the Dial out on invalid contrast checkbox if operators are to be notified if a Contrast Alarm condition occurs
on this camera. A contrast alarm will occur if the camera contrast level changes to a level that lies outside of a user
definable range.
2.3.4.4.5.5 Record Audio on Event
The checkbox enables audio recording for this camera under event conditions. Recording will cease when the ‘Capture
Duration’ time expires.
IMPORTANT NOTE
If the camera Recording Type has been set to ‘Do Not Record’, then a ‘Dial Out on Video
Loss’ will not occur.
There must be a Recording Mode selected for a dial out to occur.
IMPORTANT NOTE
If the camera Recording Type has been set to ‘Do Not Record’, then a ‘Dial Out on Invalid
Contrast’ will not occur.
There must be a Recording Mode selected for a dial out to occur.