User manual

Setup
2 - 46 ADPRO FastTrace, Issue 5
2.3.4.5 Multi-Screen Live Behaviour
This feature allows the User to view multiple channels in Live Mode simultaneously, in preset configurations.
ADPRO Video Central V8.04 or higher and ADPRO FastTrace system software version 1.02 or higher is required to
be installed on the transmitter for Multi-Screen to be available. The System will not allow any User to access the Multi-
Screen functionality if the ADPRO FastTrace transmitter does not support it (due to its hardware or software
configuration).
The performance of the Multi-Screen Live feature is dependant on the number of compression cards installed in the
ADPRO FastTrace unit. A minimum of two compression cards are required for the Multi-Screen Live feature to
operate effectively. For maximum performance, one extra compression card should be fitted over and above the
number required to meet the required recording rates.
The ADPRO FastTrace will only allow one connected user to use Multi-Screen functionality at any one time.
All other users (connected currently or in the future) will not be able to access Multi-Screen as long as the functionality
is reserved by another user, unless their privilege level is higher than that of the connected user.
For a connected user to release the Multi-Screen functionality, the user has to:
• select any video mode other than Multi-Screen (this includes Pause)
• disconnect, or
• lose it to a more privileged user.
The highest privilege level is CMS Operator. All connected users will receive a notification when the Multi-Screen
Status changes.
NOTE
As there is only one audio channel, Live Audio has priority over Alarm Audio
and Alarm Audio has priority over normal recording.