User manual

Setup
2 - 52 ADPRO FastTrace, Issue 5
2.3.4.6.4 Exit Path and Delay
When the ADPRO FastTrace is ‘sealed’ (i.e. set into the Secure mode), alarms from sensors in the Exit Path Zones
will occur as the route is used. These alarms are ignored until the end of the Exit Path Delay period. However, any
other Alarm that is not in the Exit Path Zones list, will be processed immediately.
2.3.5 Maintenance
ADPRO FastTrace V1.02 incorporates new fault reporting functionality.