Instruction manual

The user must be careful to unplug the LAN cable from the ATM or POS. The ATM or
POS has the protection when there is no comunication between the ATM and Host Server in
limited time your ATM will be offline automatically. This peroid is called the “ATM Time Out’.
This time out depends on your ATM system. It is approximately 6-10 seconds.
Stand Alone Setup
Connect the PC/DVR cable (021-037-SF) which comes from the TCPIP232 adapter
to your laptop. Power up your TCPIP232 and your laptop and run serial program like Hyper
Terminal at baudrate 19200,n,81 with VT100 emulation. Press ESC key (1BH) , [ (5Bh) and
P (50H) to enter to the Main Menu.
TCPIP232 Setups
10
TCPIP232 SETUP
* TCP/IP SETTINGS
- INFORMATION SETTINGS
- INTERFACE SETTINGS
- TIME SYNC SETTINGS
- SENSE AUTO
- TRANSACTION ALARM OFF
- FILTER TYPE ATM
- WATCHDOG TIMER ON
- EXIT
TCP/IP SETTINGS
IP ADDRESSP ADDRESS
The IP address will be the same as the ATM or POS machine.
DESTINATION PORT
Port number of destination 0 to 65535.
EXIT
Exit to main menu.
TCPIP SETTING
* IP ADDRESS 192.168.0.0
- DESTINATION PORT ANY
- EXIT
Press the Arrow key to move the cursor or change the configurations Press the Enter key to
select or save the configurations.