Instruction manual

4. Open Hyper Terminal program on the PC and setting Set comport at baud rate

19200,N,8,1 Flow control NONE.

3. Setting the IP Address in TCP/IP setting menu to be an IP of the ATM or Printer

that need to capture data.

TCPIP SETTING

* IP ADDRESS 192.168.0.0

- DESTINATION PORT ANY

2. Setting TCPIP 232 in Filter Type as DUMP.

TCPIP232 SETUP

- TCP/IP SETTINGS

- INFORMATION SETTINGS

- INTERFACE SETTINGS

- TIME SYNC SETTINGS

- SENCE AUTO

- TRANSACTION ALARM OFF

* FILTER TYPE DUMP

- WATCHDOG TIMER ON

- EXIT