Manualshelf

Instruction manual

ManualsBrandsAVE ManualsNetwork CardVideo Serial Synchronous ATM Interface VSSI-PRO
39404142434445464748
44
Firmware Update
TCPIP232 is able to update firmware by connecting with the PC/DVR cable (021-037-SF)
which comes from the TCPIP232 adapter to your laptop via the RS-232 port. Power up your
TCPIP232 and your laptop and run any serial communications program like Hyper Terminal
at baudrate 19200,n,81 with VT100 emulation. Press ESC key (1BH) , [ (5Bh) and S (53H) to
enter to the BOOT Menu then select UPDATE FIRMWARE.
TCPIP232 will ask to for confirm to do update firmware or not. Press Y(Yes) button.
Note : To enter into the TCPIP232 VSS 3700 Main Menu while boot the system if
TCPIP232 starts listening UDP message you can not enter programming
mode until reboot the system again