Instruction manual

TCPIP232 Connections

1. Stand Alone with Digital Video Recorder

This connection will inteface directly to a DVR which supports Text Insertion. This in-

sertion will interface via RS232C from TCPIP232 rear panel.DVR RS232 communication

setting to be baud rate 19200,N,8,1 Flow control NONE. So Please consult your DVR manual

or contact the DVR manufacturer. The TCPIP232 is programmed by a laptop.

TCPIP232 ATM/POS

The TCPIP232 Interface is designed to capture ATM or POS transactions on a Ethernet

LAN system and then convert captrued transactions to a serial port to interface with VSSI-

Pro (ATM Synchronous Serial Interface), VSI-Pro Max or VSI-Pro to overlay the text on the

video and export the data in formated ASCII to other devices like a DVR. It also allows full

programming of the TCPIP232 via on-screen interative menu of the above devices.

When used standalone or connected to a DVR, programming is done via any laptop running

HyperTerminal or other communications program. Default is MDI/MDIX but can be jumper

configured for Tap or Mirror Modes.

Figure 2. VSSI-Pro Interface

RS-232

Figure 1. Stand Alone Connection

ATM

Camera

Rounter/Network

Switcher

CAT-5

Video Coaxial

Serial

DVR

TCPIP232

Monitor

RS-232

CAT5 LAN

2. VSSI-Pro Interface

The VSSI-Pro also supports text insertion and programmable gray scale and back-

ground of text insertion. Users are able to define the ATM IP Address via Onscreen program-

ming on VSSI-Pro Menu.