- American Video Equipment POS / Cash Register Interface Operation Manual

Figure 131: VSI-Pro Connections with TCPIP 232 Adapter

TCPIP 232 ADAPTER

Interfacing the VSI-Pro Max to the cash register TCP/IP network requires the TCPIP 232 Adapter along with the VSI-

Pro Max. The IP address of the cash register is programmed into the TCPIP 232 Adapter via on-screen program-

ming. The cash register LAN cable is plugged into the adapter and the supplied additonal LAN cable is then plugged

into the cash register. Therefore this DOES NOT require an additional network port for the cash register interface or

any host programming of the router or switch. The TCPIP232 Adapter is not AutoSense so make sure the router is

set for MDI so normal straight thru cables are used.

Figure 129: Front of TCPIP 232 Adapter Figure 130: Rear of TCPIP 232 Adapter

The pin-out between the TCPIP 232 Adapter and the VSI-Pro is as follows:

Figure 132: Pin-Out for TCPIP 232 Adapter to VSI-Pro Max

TCPIP (DB-9M) VSI-Pro (DB-9M)

RXD 2 3 TXD

TXD 3 2 RXD

GND 5 5 GND

VSI-PRO

RG-59U

CAMERA

DC CABLE

WAVE TRANSFORMER

CASH REGISTER

TCPIP 232

ADAPTER

RG-59U

MONITOR

TCPIP 232 ADAPTER APPENDIX K

VSI-Pro Max POS / Cash Register Interface