Register your product and get support at www.philips.
Contents 1 Introduction 2 Important Safety Instructions Compliance information Recycling 4 6 8 9 3 Overview 10 Parent unit Baby unit 10 11 4 Get started Charge the parent unit Set up the baby unit Wall mount the baby unit 5 Use your baby monitor Operating range 6 Menu Zoom & Pan Voice activation Adjust brightness Add/delete cameras Change the language Reset 7 Optimize the battery life of the parent unit 8 Guarantee and service Warranty 9 Frequently asked questions 12 12 13 13 15 15 16 16 1
1 Introduction SCD609 Baby unit Congratulations on your purchase and welcome support that Philips AVENT offers, register your product at www.philips.com/AVENT. Philips AVENT is dedicated to producing caring and reliable products that give parents the reassurance that they need. This Philips AVENT baby monitor provides round-the-clock support by ensuring that you can see and hear your baby in perfect clarity.
EN 5
2 Important Safety Instructions a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Do not install near any heat sources such as radiators, heat registers, stoves that produce heat. g Where the power plug is used as the disconnect device, the disconnect device shall remain readily operable.
Use the supplied adapter to charge the parent unit. To prevent electric shock, do not open the housing of the baby unit or parent unit except for the battery compartments. Make sure that your hands are dry when you insert or replace batteries (battery pack). For the parent unit, use only the rechargeable battery pack supplied with the baby monitor. Charge the rechargeable battery pack as described in this user manual. To avoid a risk of explosion, replace the battery with a correct type.
Compliance information The FCC ID number is located on the casing bottom of the parent unit and in the battery compartment of the baby unit. $%*; % * < # means that the equipment meets certain radio communications and operational requirements. This device complies with Part 15 of the FCC Rules and RSS-210 of Industry Canada.
Recycling Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When you see the crossed-out wheel bin symbol attached to a product, it means the product is covered by the European Directive 2002/96/EC: Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products.
Solid green: The unit is running. 3 Overview f Voice activation light g Sound level lights Indicate the level of sound in your baby's room Parent unit l a k b c j i h d e f g a ON/OFF switch Press and hold to turn the parent unit on or off b Stand c Voice activation button Press and hold to turn voice activation on or off For details, please refer to Page 16. d Connector for the supplied DC adapter e Power on/off light Flashing red: The rechargeable battery is low in power.
f Lens Baby unit g Connector for the supplied DC adapter h Wall mount a b f c d g e i Wall mount screws Connector for the supplied AC/DC adapter Input: 100-240V AC Output: 6.
4 Get started 2 Insert the rechargeable battery. 3 4 Reattach the lid. Charge the parent unit Note Make sure your hands and the unit are dry when you insert and remove the rechargeable battery. Do as follows to charge the parent unit before < unit indicates that the battery is low.
Tip 4 Insert the plug into the baby unit and put the adapter in a wall socket. 5 Place the parent unit within the operation range of the baby unit. Make sure it is at least 1.5 metre/5 feet away from the baby unit to avoid acoustic feedback. 6 For more information on the operating range, see section "Operating range" below. Charging normally takes 5 hours, but it takes longer when the parent unit is switched on during charging.
4 Screw in the wall-mount. 5 Put the baby unit into the wall-mount. 6 Place the cable into the holder at the wallmount. 7 Adjust the baby unit so that you can get a best view of your baby.
5 Use your baby monitor Tip It takes about 15 seconds to establish the link between the parent unit and the baby unit. ^ runs out of power. The battery symbol To see your baby, 1 Press on the parent/baby unit. » The parent/baby unit turns on, and all indicators on the parent/baby unit light ^ # Operating range The operating range of the baby monitor is 150 metres/490 feet in open air. The range varies depending on the surroundings and other disturbing factors.
6 Menu Press the button on the side of the parent unit, and the voice activation indicator slowly blinks. Change voice activation sensitivity 1 Press menu button on the parent unit. » Menu is displayed. 2 1 2 Press +/- to move up or down the memu/ submenu, and press / to move left or right across menu/submenu. 3 4 ! " To exit, press . Press menu button on the parent unit. Select [VOICE ACTIVATION SENSITIVITY] of the baby unit.
Note Only when a position is empty in the list, a new camera Note When only one camera is in the paired list, the camera ! # # and displayed. can be paired. 1 2 Press menu button on the parent unit. Select [ADD/DEL CAM]. » The paired CAM list is displayed. 2 Note A paired CAM cannot be paired again on another position when it is assigned to a position. 3 4 Select [ADD CAM]. » An info screen will indicate that the parent unit is searching for the new camera.
Reset To reset the parent unit: 1 Press and hold unit. 2 3 Press and hold - on the parent unit. 18 EN to turn off the parent When you hold -, turn on the parent unit. » The parent unit is reset.
7 Optimize the battery life of the parent unit Recharge the parent unit when you see the low battery icon. Fully recharge the parent unit before you use it again, as completely draining the rechargeable battery may reduce its life. Remove the rechargeable battery pack from the parent unit if you are not going to use if for a week or longer. Always fully recharge the parent after a long period of time.
9 Frequently asked questions % } section, you can get support at www.philips.com/AVENT or contact the Philips Consumer Care Center in your country. Problems My parent/baby unit will not switch on. Possible causes The unit is not connected to the power supply. The battery is empty. My baby unit will not switch on. The unit is not connected to a power supply. The units are out of range. I cannot establish a connection.
The battery light on the parent ^ # The battery of the parent unit runs low quickly. Is my baby unit secure from eavesdropping? I hear other sounds from my parent unit. The charging of the parent unit takes a long time. The video monitor makes some a high-pitched noise. The parent unit makes a buzzing sound. J ^ " # There is no image on the video display when the power on light is on. The image on the video display is unclear.
The image on the video display is unclear in night vision. The parent unit does not charge when I have plugged it in. The night vision LED is still ON when the ambient condition is bright enough. The distance between the baby and the baby unit may be too long. The rechargeable battery may have reached the end of its life. The baby unit's light sensor (located on top of the housing near the antenna) is blocked from the ambient light. Tip Product information is subject to change without prior notice.
In US manufactured for Philips Consumer Lifestyle, A division of Philips Electronics North America Corporation, P.O. Box 10313, Stamford, CT 06904 In Canada imported for Philips Electronics Ltd, 281 Hillmount Road, Markham, ON L6C2S3 Call TOLL-FREE 1.800.54.AVENT En EE.UU. faricado para Philips Consumer Lifestyle, Una división de Philips Electronics North America Corporation, P.O.
