Specifications

ManualsBrandsAvenview ManualsMusical equipmentDVI-SPLITPRO-4X

VIDEO WALLS VIDEO PROCESSORS

VIDEO MATRIX SWITCHES

EXTENDERS SPLITTERS WIRELESS

CABLES & ACCESSORIES

AV Connectivity, Distribution And Beyond...

KVM Quad Screen Video Multiviewer

With IR, Keyboard and Mouse Control

The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or

warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications

and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted

by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims

any express or implied warranty, relating to its products of Avenview Inc. is strictly prohibited.

Model #: DVI-SPLITPRO-4K

Summary of content (36 pages)

PAGE 1
AV Connectivity, Distribution And Beyond... VIDEO WALLS VIDEO PROCESSORS VIDEO MATRIX SWITCHES EXTENDERS SPLITTERS WIRELESS CABLES & ACCESSORIES KVM Quad Screen Video Multiviewer With IR, Keyboard and Mouse Control Model #: DVI-SPLITPRO-4K © 2013 Avenview Inc. All rights reserved. The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products.
PAGE 2
Product Application & Market Sectors Corporate House Of Worship Military Residential Education Industrial Medical Aviation www.avenview.
PAGE 3
TABLE OF CONTENTS 1. GETTING STARTED...........................................................................................................................1 1.1 Important Safeguards...............................................................................................................1 1.2 Safety Instructions...................................................................................................................1 1.3 Regulatory Notices Federal Communications Commission (FCC)..........
PAGE 4
1. GETTING STARTED SECTION 1: GETTING STARTED 1.1 Important Safeguards Please read all of these instructions carefully before you use the device. Save this manual for future reference. What the warranty does not cover •• Any product, on which the serial number has been defaced, modified or removed.
PAGE 5
1.3 Regulatory Notices Federal Communications Commission (FCC) This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. Warning symbols Description ONLY USE THE PROVIDED POWER CABLE OR POWER ADAPTER SUPPLIED. DO NOT TAMPER WITH THE ELECTRICAL PARTS.
PAGE 6
2. Introduction Avenview DVI-SPLITPRO-4K KVM Quad Screen Multiviewer with IR, Keyboard and Mouse is an advanced video processor for most multimedia presentations. This unit is an ideal solution for applications where four video signals must be displayed on a single display. It supports up to 16 types of video inputs, of which four can be outputted simultaneously with the desired display layout through software control.
PAGE 7
www.avenview.
PAGE 8
2.1 Package Contents Before you start the installation of the converter, please check the package contents. 1 DVI-SPLITPRO-4K x1 2 DVI – DVI & VGA breakout Cable x4 3 VGA to Component breakout Cable x4 4 DVI to VGA Adapter x4 5 Y cable –S-VIDEO TO S-VIDEO-CVBS x4 6 Rack Mounting Kit x1 7 RS232 to USB Adapter x1 8 IR Remote Control x1 9 Software CD x1 10 AC Power Supply x1 11 User’s Manual x1 www.avenview.
PAGE 9
2.2 Before Installation •• Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. •• Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity. •• Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. •• Do not twist or pull by force ends of the video cable. It can cause malfunction.
PAGE 10
2.3 Panel Description Avenview Advanced Quad Screen Video Processor (DVI-SPLITPRO-4K) has 16 inputs and accepts both graphics and video signals, which come from computers (DVI or VGA), composite, and component video sources respectively. You can pick up four of the ten inputs and then display four of them simultaneously on the same screen. DVI-SPLITPRO-4X REAR PANEL 2.3.
PAGE 11
3. INSTALLATION To setup Avenview DVI-SPLITPRO-4K follow these steps for connecting to a device: 1. Mount or fix the DVI-SPLITPRO-4K safely 2. Switch off DVI-SPLITPRO-4K and all source devices and displays that will be connected 3. Connect a monitor, projector, other displays that come with DVI / VGA inputs by using 1 male – male DVI cable to DVISPLITPRO-4K DVI output. (you can connect 2 displays equipped with DVI and VGA respectively by DVI – DVI/VGA Y cable 4.
PAGE 12
3.2 Default display modes for KVM hot key control Full Quad1 Quad2 * Red Icon implies the main display area. Key Combination 4.
PAGE 13
5. SOFTWARE SETUP GUIDe 1. Power up the DVI-SPLITPRO-4K and you can see VFD on the front panel blink. 2. Launch Avenview Control Software. It will open following “Serial Port” setting page. 3. Click on Scan button and it will automatically detect Avenview Video Processor and display the following screen: www.avenview.
PAGE 14
4. Note the “Device – ID” and Select Correct “Com Port” and Device ID” from bottom of screen. Once Correct “Com Port” and “Device ID” is selected, it will change “Device Modular Error” to “Device Ready” as shown below: 5. Once Device is Ready, click “OK” and Avenview Control Software will launch www.avenview.
PAGE 15
5.
PAGE 16
4 BACKGROUND SETTING DVI-SPLITPRO-4K offers the video background to make this advanced unit actually working like 5 channel video mixer! The default background video must work as full screen! Users can choose between color and video background through the following control window. Click on this button will show the dialog for output resolution, background color and background channel setting. Note * We recommend not changing Serial Resolutions.
PAGE 17
6 DISPLAY / LAYOUT MODE Set signal channel full screen or all channel Notice that the input sources will not be changed in Software. www.avenview.
PAGE 18
5.4 DEFAULT LAYOUTS There are 5 pre-configured layouts available from Control Software, IR Remote Control or Front Panel Buttons. -- Panel Cross -- Panel Right – Type -- Panel Left – Type -- Panel Top – Type -- Panel Bottom – Type PANEL CROSS PANEL RIGHT – TYPE www.avenview.
PAGE 19
PANEL LEFT – TYPE PANEL TOP – TYPE www.avenview.
PAGE 20
PANEL BOTTOM – TYPE Input Signal which is selected at “Focus Input” will be displayed as Main Video Sources. 5.5 FOCUS INPUT Select which Input Source should stay in focus when “Layouts” are selected 5.6 SAVE AND SET CUSTOM LAYOUTS Save up to 8 Custom Layouts and Set them using Control Software, Front Panel or IR Remote Control. www.avenview.
PAGE 21
7 LAYOUT CONTROL SIZE Set layout control size in Software by percent. If you enable Fixed Stretch, Aspect Ratios are kept with each Input layout is changed. 8 LAYOUT CONTROL Create different Layouts by Drag and Drop. You can use “Fixed Aspect Ratio” as described above to retain Aspect Ratio of source image.
PAGE 22
5.7 INPUT SELECTION: -- Select “Focus Input” from drop down menu or by Clicking on Main Layout Window. -- Click on “Input Signal”. -- Select Correct “Input Signal” from drop down menu. -- Once right Input Signal is selected, click on UP ARROW (Input Update) beside Focus Input to update it on system memory. www.avenview.
PAGE 23
5.8 SIZE AND POSITION: Select on “Size / Pos” CHANNEL WINDOWS VISIBLE: You may uncheck “Channel Window Visible” if you decide to not show this Windows on screen BLEND: Change the value of Blending from 100% to 0%. This will allow you to overlay an Input Source on other. CUSTOM HEIGHT AND WIDTH: If you have specific requirement for Input Layout, you may adjust them here. www.avenview.
PAGE 24
5.9 COLOR SETTING: Various options to change Brightness, Contrast, Saturation, Hue, Red, Green and Blue are available on each “Input Source” 5.10 COLOR BALANCE AND AUTO CONFIGURE: You may adjust Color Balance and Auto Configure them by selecting these options 6.
PAGE 25
7. CASCADE INSTALLATION PRODUCT SETTINGS The Device ID number will show on the VFD, like below picture. The “Device ID” number can adjust by button menu. Please push the “Down, Up, Left, Right” button, enter Menuà “(05/05) System Setting” Menuà “(03/03) Device ID” Menu. Push the “Right” button. When the “Up” and “Down” arrow are display, you can adjust number by “Up” and “Down” button. Set DVI-SPLITPRO-4K to RS485 Mode by “DIP Switch”. Please check the VFD will display “Square” Icon.
PAGE 26
8. Converter Serial (1) C5-RS232-S (Transmitter) Model Name C5-Rs232-S ROLE OF USAGE Transmitter [TX] TRANSMISSION LENGTH Up to 1,000m (1,100yd) [CAT5e] BAUD RATE Up to 57.
PAGE 27
C5-RS232-S DVI-SPLITPRO-4K Device ID: 0 Device ID: 1 Device ID: 2….. www.avenview.
PAGE 28
9. FRONT PANEL CONTROLS 9.1 FRONT PANEL PUSH BUTTONS DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 15 PAP Full Screen 11 Function key: Layout 2 Input Select 12 N/A 8 Function key: Input Signal 13 Infrared Sensor 9 Function key: Setting 2 10 3 4 5 6 7 14 15 Navigation Function key: Layout 1 www.avenview.
PAGE 29
9.2 FRONT PANEL PUSH BUTTONS FUNCTIONS 9.3 SELECTING PIP WINDOW ARRANGEMENT Main Window with 3 triple sub-windows aside You may choose one of the following layouts from 4 presets: 1. To cancel the operation, press [LAYOUT 1] again 2. Select a type by pressing according button while VFD B_top: press UP B_btm: press DOWN B_left: press LEFT B_right: press RIGHT Quad Windows in crisscross + 3 user-defined custom layouts 1. To cancel the operation, press [LAYOUT 2] again 2.
PAGE 30
10. ON SCREEN DISPLAY MENU www.avenview.
PAGE 31
11. IR REMOTE CONTROL Avenview DVI-SPLITPRO-4K, Advanced Quad Screen Processor ships with a compact IR Remote Control that allows for direct access to most commands used to control the video processor. IR REMOTE BUTTON DEFINE 1. Power Button Set the output video into Sleep Mode (No Video) 2. Cross-Layout Set PAP layout to default layout (cross type ) 3. Side-Bar Layout Set PAP layout to default layout (Side-Bar type ) 4.
PAGE 32
12. SPECIFICATIONS MODEL DESCRIPTION DUAL OUTPUT SUPPORT DVI-SPLITPRO-4K Advanced Quad Screen Video Processor with IR, Keyboard and Mouse Control Yes (DVI & VGA) BACKGROUND VIDEO INPUT Yes HDCP COMPLIANCE Yes DVI/HDMI Single Link - 4.95Gbps VGA - 165 MHz VIDEO BANDWIDTH Component - 30 MHz S-Video – 13.5 MHz Composite – 13.
PAGE 33
13. Supported Resolutions 13.
PAGE 34
14. GENERAL TROUBLESHOOTING PROBLEM POSSIBLE SOLUTION • Ensure that DVI-SPLITPRO-4K is plugged in NO POWER NO OR DISTORTED IMAGE POOR QUALITY • I f you are recovering from power outage, accidentally unplug the adapter or other power surge conditions, leave the device off for an at least a minute and then power it on again. • M ake sure all cables are in good working condition and properly connected to the DVI-SPLITPRO-4K and displays.
PAGE 35
Avenview Warranty Certificate AVENVIEW CORP. (“Avenview”) warrants Avenview-branded product(s) contained in the original packaging against defects in materials and workmanship when used normally in accordance with Avenview's enclosed manual guidelines for a period of THREE (3) YEARS from the date of original retail purchase - Warranty Period. Avenview’s published guidelines include but are not limited to information contained in technical specifications, user manuals and service communications.
PAGE 36
AV Connectivity, Distribution And Beyond... TECHNICAL SUPPORT Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc.