Specifications

www.avenview.com

1.8 Troubleshooting

General Troubleshooting

Problem

Possible Solution

No Image

 Check if the PC Power is on

 Check if connection to the computer and the monitor are

correct.

 Turn the PC Power off and on again.

 Please use DC adapter (5V, 2A) included in the package for

Receiver. Optional power supply for Transmitter.

LCD Screen Defects Appear

 This product supports up to WUXGA resolution.

 Check the maximum resolution range of the graphics card.

1.9 Caution

1. Do not put heavy object on top of the FO-DVI-1000X-EMIX. It may cause product malfunction.

2. Put the product on even and stable location. If the product falls down or dropped, it may get

damaged.

3. Keep away from high temperature (over 50°C), low temperature (under 0°C) or high humidity. It may

cause a fire and injury by electrical shock.

4. Use DC power adapter with correct specification. Otherwise it may cause fire.

5. .

6. Use the multimode (50/125um) optical fiber.

7. Do not view directly laser module of transmitter or the end of the other side of optical cable

connected to transmitter with optical instrument.

8. Do not twist or pull by force either ends of the optical cable. It can cause malfunction. Minimum

bending diameter is 45mm (see illustration below)