User guide

Avenview HDM-C6VWIP
Control4 Driver User Guide
Janus Technology Ltd
Copyright © 2014
4
Figure 4: Driver Properties
The driver features a number of properties that report status or control configuration. Note
that the Serial Port Settings Types provide a way of defining the settings for a serial port,
which can then be applied to the serial ports of multiple inputs and outputs.
Property
Description
Driver version
The version of the driver. Should be 100 for version 1.00.
Status
Should be Operational when actually in communication with
the Avenview system. Any other status indicates a connection
problem of some sort.
Serial Port Settings type x
Baud Rate x - the baud rate in bits per second.
Data Bits x – the number of data bits.
Stop Bits x – the number of stop bits.
Data Parity x – the parity bit setting.
Inputs using Settings x, Outputs using Settings x – the
transmitter and receiver units that should have their serial port
configured to use these settings.
Inputs and outputs can be specified as a comma separated list
of numbers or number ranges, e.g. 1,2-5,7
Debug Settings
Debug Mode – support use only
Debug Subsystems – support use only
Debug Level – support use only
Table 1: Driver Properties