User guide

Avenview HDM-C6VWIP
Control4 Driver User Guide
Janus Technology Ltd
Copyright © 2014
7
Driver Variables
The driver features a number of variables, providing feedback from the Avenview system.
Variable
Description
INxxx_Name
The name defined for a particular input in the Avenview system.
OUTxxx_Name
The name defined for a particular output in the Avenview system.
Table 3: Driver Variables
The names are taken from the part after the dash in the codename (see the above section
entitled “Avenview Configuration” for more information).
Troubleshooting
The driver cannot control the Avenview system
 Confirm the Ethernet switch used by the Avenview system is correctly uplinked to the
same network as the Control4 processor.
 Confirm that the correct IP address is defined in the Network Connections for the
Avenview driver.
Switching commands are failing
 Ensure you have named the devices correctly in the Avenview system. Read the
section of this guide entitled “Avenview Configuration” for more information.
An input is distorted, or is displaying only part of the complete image
 Try sending the Reset Input command to the affected input.