Specifications

www.avenview.com

Page 8

3. INSTALLATION (HBT-C6POEWP-S)

To setup Avenview HBT-C6POEWP-R please follow these steps for connecting to a device:

1. Power off sources such as using Laptop/PC DVD player at Podium or where installed.

2. Connect HDMI video Source to the HDMI INPUT on the compatible TX- up to with Full HD, 3D and 4k x 2k support

3. Connect CAT 5/6 OUT to a compatible HBT-C6POEWP-R (Rx) CAT 5/6 IN and HDMI cable to HDMI Displays

4. Plug in 24V/1.25A DC power adapter to the screw terminal HBT-C6POEWP-S- Green LED illuminate

5. Power on HDMI Source and HDMI Display

6. When the Input is connected and turned on the corresponding Yellow LED will light on the LINK LED when signal is

detected and transmitting.

Attaching the Wall Plate Transmitter to a Drywall or Commercial New Construction