AV Connectivity, Distribution And Beyond... VIDEO WALLS VIDEO PROCESSORS VIDEO MATRIX SWITCHES EXTENDERS SPLITTERS WIRELESS CABLES & ACCESSORIES HDMI Receiver Single CAT5/6 with HDCP Key Code Model #: HDM3D-C5HD-R © 2013 Avenview Inc. All rights reserved. The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products.
Product Application & Market Sectors Corporate House Of Worship Military Residential Education Industrial Medical Aviation www.avenview.
TABLE OF CONTENTS 1. GETTING STARTED...........................................................................................................................1 1.1 Important Safeguards...............................................................................................................1 1.2 Safety Instructions...................................................................................................................1 1.3 Regulatory Notices Federal Communications Commission (FCC)..........
1. GETTING STARTED SECTION 1: GETTING STARTED 1.1 Important Safeguards Please read all of these instructions carefully before you use the device. Save this manual for future reference. What the warranty does not cover •• Any product, on which the serial number has been defaced, modified or removed.
1.3 Regulatory Notices Federal Communications Commission (FCC) This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. Warning symbols Description ONLY USE THE PROVIDED POWER CABLE OR POWER ADAPTER SUPPLIED. DO NOT TAMPER WITH THE ELECTRICAL PARTS.
2. Introduction The Avenview HDM3D-C5HD-R, HDMI Receiver over Single CAT5 with HDCP key code ensures the transmitted signal is properly received over the CAT5/6 cable producing Full HD 1080p, Deep Color, 3D video and DTS-HD, 7.1 or Dolby audio signals to any HDMI or DVI compliant displays at 50m (720p/1080i) and 40m (1080p).
2.1 Package Contents Before you start the installation of the Extender/Splitter, please check the package contents. 2.2 1 HDM3D-C5HD-R X1 2 POWER ADAPTER (+5V 2A DC) X1 3 USER’S MANUAL X1 Before Installation •• Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. •• Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity.
www.avenview.
2.3 Panel Description 2.3.1 INPUT PANEL (Receiver, HDM3D-C5HD-R) Front 1 2 1. EQ: Min/Max Dial Adjustment NOTE: Stop adjusting when video/audio is displaying as the source. 2. HDMI OUT: To HDMI HD Display with Male to Male Cable. 2.3.2 INPUT PANEL (Receiver, HDM3D-C5HD-R) Rear 5 6 3. Power Connector: 5V 2A DC Locking Power Wall Adapter 4. HDMI Signal IN: RJ45 connection from the Transmitter HDM-C5XD-S, HDM-C5XD-SR or HDM3D-C5SP-4/8 www.avenview.
3. Installation (HDM3D-C5HD-R) To setup Avenview HDM3D-C5HD-R please follow these steps for connecting to a device: 1. Turn off all devices including monitors / TV 2. Connect to a HDMI source (such as a Blu-Ray Disc player) to the Transmitter 3. Connect HDM3D-C5HD-R to compatible devices listed below with a CAT5E/CAT6 cable, then to display with HDMI cable. -- HDM-C5XD-SR -- HDM-C5XD-S -- HDM3D-C53X-S -- HDM-C5SP-8SR 4. Plug in 5V 2A DC Power (supplied). 5. Power on the HDMI display 6.
5. General Troubleshooting PROBLEM POSSIBLE SOLUTION •• Check if connection to the source and the display are correct. NO IMAGE •• Ensure that display device supports 480p, 720p and 1080p resolution SCREEN DEFECTS APPEAR EQUALIZER SETTINGS •• This product supports up to 1080p resolution. •• Check the HDMI connection •• If outputting from a PC. Check the maximum resolution range of the graphics card.
6. Specifications ITEM UNITS DESCRIPTION HDM3D-C5HD-R UNIT DESCRIPTION HDMI Receiver HDMI COMPLIANCE Yes HDCP VIDEO BANDWIDTH SUPPORTED RESOLUTIONS RESOLUTION AND DISTANCE @ 8-bit AUDIO SUPPORT EQUALIZATION INPUT TMDS SIGNAL INPUT DDC SIGNAL ESD PROTECTION Yes with Key Code Single Link 225 MHz (6.75Gbps) 480i / 480p / 720p / 1080i / 1080p60 Full HD: (1080p) ~ 40meter (130feet) (CAT5e) / 45meter (140feet) (CAT6) HD: (720p/1080i) ~ 50meter (165feet) (CAT5e) Surround Sound (up to 7.
Notice 1. All HDMI over CAT5 transmission distances are measured using Belden CAT6A (625MHz), 4-Pair, U/UTP-Unshielded, Riser-CMR, Premise Horizontal Cable, 23 AWG Solid Bare Copper Conductors, Polyolefin Insulation, Patented Double-H spline, Ripcord, PVC Jacket using Quantum 980 signal HDMI Video Generator Module Video Pattern Testing. 2. The transmission length is largely affected by the type of category cables, also the type of HDMI sources, and the type of HDMI display.
Notes www.avenview.
Avenview Warranty Certificate AVENVIEW CORP. (“Avenview”) warrants Avenview-branded product(s) contained in the original packaging against defects in materials and workmanship when used normally in accordance with Avenview's enclosed manual guidelines for a period of THREE (3) YEARS from the date of original retail purchase - Warranty Period. Avenview’s published guidelines include but are not limited to information contained in technical specifications, user manuals and service communications.
AV Connectivity, Distribution And Beyond... TECHNICAL SUPPORT Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc.