Specifications

www.avenview.com|12
1.13 Software Panel
Button Name
Description & Function
State
Please refer to Section 1.12
Setting
Serial Port Setting –Select the correct COM Port for Connection to device.
Connect
Once the correct COM port selected this button activates connection to device
Disconnect
Disconnects communication to the RS232 port
System
Please refer to section 1.14 (System Control)
Input Resolution
Set the Input Resolution of the source 800x600@60Hz to 1920X1200@60Hz
Main Source
Choose which source will be the MAIN from CVBS\SVIDEO\VGA\DVI HDMI
Sub Source
Choose which source will be the SUB from CVBS\SVIDEO\VGA\DVI HDMI
Display Layout Mode
Choose your OUTPUT Layout Main Full Screen\Sub Full\PIP Mode\Side By side\Custom
1.14 System Button
This tab has been made available because of the new DVI Modular PCB card design. This allows the user to
add /remove Modular cards to the unit up to 12 Output cards, and configure and update their status
individually;
Input State: ON/OFF Power State: ON/OFF Universal Power Ports ON/OFF
Firmware Update: 1-12 Output cards Get System Information