Owner's manual

www.avenview.com

b. According to the DOS direction, input the command: telnet 192.168.0.104 9999

(192            

follows. The serial code of produce: XXXXXXX

MAC address: XX：XX：XX：XX：XX：XX

Vision number of Software: XX.X (XXXXXX)



c. 

Change setting: 0 server setting;

1 serial interface setting;

6 safety setting;

7 resume default setting;

8 quit without save;

9 quit and save

Choose step: ??

d. 

e. 

IP address of setting net gateway: <N>

f. 

The masking of subnet: digit of the inputted masking<0=default>

g. 

Change the passport of telnet (N)

h. 

Change set:

0 server setting;

1 serial interface setting;

6 safety setting;

7 resume default setting;

8 quit without save;

9 quit and save

Choose step: ?

i. 

j. Input the command: ping 192.168.0.104, if the above operation is successful, information is

showed as follows:

k. Pinging 192.168.0.104 with 32 bytes of data:

Reply from 192.168.0.104: bytes=32 time<10ms TTL=64

Ping statistics for 192.168.0.104:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in

milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms

3. Set a new parameter of IP address according to device’s MAC address:

a. Record the Mac address at rear keyboard.