Owner's manual

www.avenview.com
26
Function
Get the load mark of output channels
Format
[X4]*04S
Response
Xf·Xf··Xf·Xf·Load↵
If Xf is 0, it means no load. If Xf is 1, it means there is load
For example ： Get the load mark of output channels
Commands sent by PC: 1*4S
Response by the device: 00·01·01·01·00·00·00·00·Load↵
Explanation: The output channels 2,3 and 4 have loads.
Get Device Temperature
Function
Get device temperature
Format
[X4]*05S
Response
[X4]Tem[X31]↵
The actual temperature: [X31]-20
For example ： Get device temperature
Commands sent by PC: 1*5S
Response by the device: 1Tem51↵
Explanation: The actual temperature is 31.
Get the EDID of Outputs to Inputs
Function
Copy the EDID of the output channel to the input channel
Format
[X1]*[X2]~
Response
[X1]*[X2]·EDID↵
For example ：Copy the EDID of the output channel 3 to the input channel 4
Commands sent by PC: 4*3~
Response by the device: 4*3·EDID↵
Copy the Default EDID to Inputs
Function
Copy the default EDID to the input channel
Format
[X1]*15S
Response
Default↵
For example: Copy the default EDID to the input channel 4
Commands sent by PC: 4*15S
Response by the device: Default↵
Reset Command
Function
Reset
Format
[ESC]zXXX
Response
ZapXXX↵