User`s guide

www.avenview.com
4
1.2 Safety Instructions

Do not dismantle the housing or modify the module.

Dismantling the housing or modifying the module may result in electrical shock or burn.

Refer all servicing to qualified service personnel.

Do not attempt to service this product yourself as opening or removing housing may expose you to
dangerous voltage or other hazards
 Keep the module away from liquids.
 Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid
falls or spills on to the housing, unplug the module immediately.
 Have the module checked by a qualified service engineer before using it again.
1.3 Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.
1.4 Introduction
Avenview SW-DVI-4X2 Matrix Switch enables you to switch and scan DVI source from up to 4 DVI signals of
host computers by RS485 communication. It can output to 2 DVI source monitors or TV. SW-DVI-4X2 also
supports HDCP compliant device. User can control input and output connection easily by manual or automatic
mode by using RS-485 communication.
- Select a DVI graphic source from multi sources by data communication software.
- Multi Input and Multi Output
- Auto and Manual mode select
- Uses standard DVI-I connection
- Flexibly increase number of channel by multi step connection
- HDCP compliant