User`s manual

14
b. Select camera channel (1~4) and mark
Enable
to enable the channel.
c. Select
Input
as IP Camera.
d. In
Camera
section, mark
Display
to allow the live video of camera to display on surveillance screen.
Then, enter the
Name
and
Description
of the channel.
e. In
Camera Information
section, click
Add IPCam
for detail setting.
f. In
IP Camera Setting
window, click
Protocol
radio button, and then, select
Protocol
,
Mode
, and
Video Format
. User also can click
Search Devices
button to find the IP cameras that can be
detected on your LAN network.
g. Enter IP address in
IP Camera site
column or enter the
URL
of IP camera.
h. Enable
Authentication
and enter
ID
and
password
if IP camera’s access authority is required.
i. Click
OK
to save the setting.
j. When the IP camera has connected, user should see the camera information of
Protocol
,
Model
,
Video Format
,
IP port
, and
Channel
.
k. To connect another IP camera, follow the above steps.
2.1.2 Using the Virtual Keyboard
User can use the Virtual Keyboard when the keyboard is not available. Just click or right-click screen to
call out the virtual keyboard. For uppercase, click
Caps
button. To exit, click
Esc
.