AVerVision300AFHD User Manual
Federal Communications Commission Statement (Class A) NOTE- This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
R e m o t e C o n t r o l Battery Safety Information - Store batteries in any cool & dry place. Do not dispose used batteries in domestic waste. Dispose batteries at special collection points or return to stores if applies. Remove the batteries if they are not in use for long period of time. Battery leakage and corrosion can damage the remote control, dispose batteries safely. Do not mix and use old and new batteries.
Table of Contents Package Contents .................................................................................................... 1 Optional Accessories ............................................................................................... 1 Get Familiar with the AVerVision300AFHD ................................................................ 2 Right Panel............................................................................................................... 2 Rear Panel ............
White Balance ............................................................................................. 21 Focus .......................................................................................................... 21 Presentation ........................................................................................................... 22 Spotlight ...................................................................................................... 22 Visor .......................................
Dimension ................................................................................................... 31 External Storage ......................................................................................... 31 RS-232 Diagram Connection .................................................................................. 31 RS-232 Cable Specifications .................................................................................. 32 RS-232 Transmission Specifications ............................
ENGLISH Pa ck a g e C o n t e n t s Make sure the following items are included in the package. RS-232/CVBS Cable USB Cable Remote Control (batteries included) RGB Cable Software & Manual CD AVerVision300AFHD Power Adapter (12V, 2A) * The power adapter will vary depending on the standard power outlet of the country where it is sold.
G e t F a m i l i a r w i t h t h e AV e r V i s i o n 3 0 0 A F H D (5) (1) (6) (7) (2) (8) (3) (4) (9) (fig. 1.1) Name (1) Camera head (2) Camera lens (3) Control panel (4) Built-in MIC (5) (6) Arm Left panel (7) (8) IR sensor Rear panel (9) Right panel Function Contain the camera sensor. Focus the image in the camera. Easy access to various functions. Record audio when recording video clip. The recorded sound will be in monophonic. Extendable for viewing coverage.
Re a r P an el (4) (3) (fig. 1.3) (1) (2) Name Function (1) Antitheft Slot Attach a Kensington compatible security lock or antitheft device. (2) DC12V port Connect the power adapter into this port. (3) RGB INPUT port Input the signal from a computer or other sources and pass it through to the RGB OUT port only. Connect this port to the RGB/VGA output port of a computer.
Cont ro l P an el (1) (2) (7) (3) (8) (9) (4) (10) (11) (5) AVerVision300AFHD (12) (13) (6) (fig. 1.5) Name Function (1) MENU Open and exit the OSD menu. (2) RECORDING Start/Stop audio & video recording. Audio and video recording can be saved on a SD card or an USB Flash drive only. See HUExternal Memory StorageUH. (3) CAP/DEL - Capture picture in Camera mode. In continuous capture mode, press this button again to stop. - Delete the selected picture/video in Playback mode.
Re mot e Cont ro l The remote control requires two (2) “AAA” size batteries (supplied), make sure batteries are installed properly before use. You can access all the features of AVerVision300AFHD with the remote. (1) (2) (3) (4) Name Function (1) POWER Turn the unit on/standby. (2) CAMERA (3) RECORD (17 ) (18 ) (19 ) (4) CAPTURE (20 ) (5) VISOR Camera mode displays the video signal from the built-in camera. Start/Stop audio & video recording.
Name (8) (1) (2) (3) (4) Function ▲,▼,◄, & ► (12 ) (13 ) (14 ) (15 ) (16 ) (5) (6) (7) (17 ) (18 ) (19 ) (8) - Pan and zoom-in image (above digital zoom level) in both live and playback mode. - Select options in OSD menu. - Use ▲&▼ to increase and decrease the video playback volume. - Use ◄&► to play the video backward and forward. - (9) (20 ) (9) (10 ) (21 ) (11) (22 ) (23 ) (fig. 1.6) AUTO FOCUS Move the Spotlight frame and Visor screen cover. Adjust the focus automatically.
(1) (2) (3) (4) Name Function (15) SPOTLIGHT Color – select the Spotlight frame color. Press to move to the next selection. (12 ) (13 ) (14 ) (15 ) (16 ) (5) (6) (7) OK – press for the setting to take effect. If you select ON, the frame will appear and blink, use the ▲,▼,◄, & ► buttons to adjust the frame size and press to set the desired size; and OFF will close the submenu.
Making the Connections Before making the connection, make sure the power of all devices are turned off. If you are not sure on where to connect, simply follow the illustrated connections below and also refer to the user manual of the device you are connecting the AVerVision300AFHD with. S e t t h e T V- RG B S w i t ch S e t t i n g The TV-RGB switch determines the display output selection.
C o n n e c t to a Mo n ito r o r LC D / D L P Pr o je c to r wi th HDMI in te rface Locate the HDMI input port of the display device and connect it to HDMI output port of AVerVision300AFHD. Make sure the TV/RGB switch is set to RGB. HD MI monitor HDMI cable LCD/DLP projector Connect to a TV Locate the VIDEO or SCART RGB (if applicable) input port of the TV or Video equipment (i.e., VCR) to record your presentation and connect it to RCA jack of RS-232/CVBS cable.
C o n n e c t i n g t h e Po w e r Connect the power adapter to a standard 100V~240V AC power outlet. The unit automatically in standby mode once the power is connected. Press Power adapter to turn on. Wall outlet Connect to a Computer Locate the RGB (VGA) output port of the computer or laptop and connect it to RGB INPUT port of AVerVision300AFHD. The video signal from the RGB INPUT port is streamed to RGB OUTPUT port.
Connect to a Computer via USB Locate the USB port of the computer or laptop and connect it to USB port of AVerVision300AFHD. This enables you to use AVerVision300AFHD as a USB Camera or to transfer the captured pictures/videos from the memory and to computer. Also see “Transfer File from AVerVision300AFHD to PC”. Make sure the USB Flash Drive switch (see fig. 1.2 #1) is set to the left. Connect an Exter nal Microphone Plug a 3.5mm mono microphone to port.
C o n n e c t a n A m p l i f i e d S p e a ke r Plug a 3.5mm plug amplified speaker to supported. port. Only the audio from the video playback is We recommend connecting an amplified speaker to the Audio output port. Take caution when using earphones. Adjust the volume down on the remote to prevent hearing damage due to loudness. Connect to a Microscope Connect the AVerVision300AFHD to a microscope enables you to examine microscopic objects on a big screen. 1.
5. Remove the microscope eyepiece from the microscope and connect it to the microscope adapter. Fasten the 3 bolts until the adapter secures the eyepiece. Microscope Coupler Microscope Adapter Press the latch to detach For the eyepiece, we module suggest the light from using 15.5mm eye higher. the relief cameraorhead 6. Attach the microscope microscope coupler to the AVerVision camera head. Then connect it to the LED Light Module AVerVision and microscope.
S e t t i n g U p AV e r V i s i o n 3 0 0 A F H D This section provides useful tips on how to adjust the AVerVision300AFHD to meet your needs. Camera Head The camera head can turn freely at 90° to the left and right and up and down. If the camera head is in upright position, you can also press ROTATE on the remote control twice to rotate the image in 180°.
Me ch a n ic a l A r m The mechanical arm design can extend for a full A4 paper viewing. Infrared Sensor Aim the remote control at the infrared sensor to operate the unit.
Mo u n tin g th e V 3 0 0 A F HD o n a F l at Su rfa c e Measure and mark the horizontal of 75 mm and vertical of 70 mm from the center line distance between the holes on the flat surface as describe in the illustration below. Use 4 pieces of M4.0 screws for 6 mm holes and secure the V300AFHD on the flat surface.
Exter nal Memor y Stora ge AVerVision300AFHD supports both SD memory card and USB flash drive for more image capture and audio & video recordings. AVerVision300AFHD can detect when there is an external storage media and automatically switch to the last detected storage. If no external storage is connected, all captured still images will be saved in the built-in memory. Insert an SD Card Insert the card with the contact facing down until it reaches the end.
OSD MENU There are 4 tabs on the OSD menu: IMAGE, PRESENTATION, SETTING and SYSTEM. In Playback mode, you can access PLAYBACK OSD menu to enable the Slide Show feature and modify Slide Show interval and transition setting if desire. For TV output, the RESOLUTION will be disabled in SETTING menu list.
Nav igate the Me nu and Sub menu 1. Press MENU button on the remote or control panel. 2. Press ► and ◄ to toggle between tabs 3. Press ▼ and ▲ to choose a selection in the menu list. 4. Press to make a selection. 5. Use ► and ◄ to adjust the setting or make a selection. 6. Press to enter submenu. 7. Press MENU to close the OSD menu. Ima ge Menu Screen Function Brightness Adjust brightness level manually between 0 and 63.
Menu Screen Function Mode Select from the various image display settings. Sharp - adjust the contrast along the edges making text appear more visible. Graphics - adjust the gradient of image. Motion - increase frame rate. Sufficient lighting is required when using this mode. Microscope - automatically adjust optical zoom for microscopic viewing. Effect Convert the image into positive (true color), monochrome (black and white) or negative. Mirror Select to flip the image in Camera mode.
Menu Screen Function Auto Image Select ON or OFF to automatically adjust the white balance and exposure setting, and correct the color and exposure compensation. Exposure Select the exposure setting. AUTO - automatically adjust the camera exposure and the amount of light required. MANUAL - manually adjust the exposure level. The exposure can be adjusted up to 100. White Balance Select the White Balance setting for various light conditions or color temperature.
Pr esentation Menu Screen Function Spotlight Spotlight overlays a frame on the presentation screen. You can move the Spotlight around the presentation screen using the ▲, ▼, ◄, & ► buttons. Select Execute to call the Spotlight submenu. In the Spotlight submenu, the following options are available. ON/OFF – select to run/cancel the Spotlight. Press to move to the next selection. Shade – set the opacity level of the area outside the box.
Menu Screen Function In the Visor submenu, the following options are available. ON/OFF – select to run/cancel the Visor. Press to move to the next selection. Shade – set the opacity level of the covered area. The shaded area will completely turns black when it is set to level 100. Press to move to the next selection. OK – press for the setting to take effect. If you select ON, upper part of the presentation screen is slightly exposed.
Menu Screen Function Timer Start/Pause/Stop the timer and set the timer duration. The timer automatically counts up after the count down reaches zero to show the elapsed time. Even when you switch between Playback, PC or Camera modes, the timer will continue. Setting Menu Screen Function Capture Select to set the capture resolution, quality, type and interval settings. Resolution Select the capture size. In 5M setting, the capture resolution size is 2560 x 1920.
Menu Screen Function Type Select the capture type. Single - capture one picture only. Continuous - capture successive pictures. Interval Set the time interval for continuous capture. The length can be set up to 600 sec (10 min). Recording Select the video recording compression setting. Storage Change the storage location. Audio & video recording can only be saved in SD memory card or USB flash drive. Format Format to delete all the data in the selected memory.
Menu Screen Function USB to PC Select the status of the AVerVision300AFHD when it is connected to the computer via USB. Make sure the USB switch on the left panel is set to . Camera - can be used as a computer webcam or with our bundled software to record video and capture still image. Storage - transfer the captured pictures/videos from the memory to computer hard disk. Flicker Select between 50Hz or 60Hz. Some display devices cannot handle high refresh rates.
Menu Screen Function Backup Copy the image from the built-in memory to SD card or USB flash drive. Save Setting Save current setting in the selected profile number. Only effect, mode, brightness and contrast settings can be saved. Recall Setting Restore the setting back to the selected profile number. Information Display the product information. Default Restore all the settings into original factory default setting.
Pla yb a ck Menu Screen Function Slide Show Display all captured still pictures in an automated slide show. The video file will be skipped. Interval Set the interval before displaying the next picture. The length can be set up to 100 sec. Slide Show Effect Select the slide show transition effect. Slide image Wipe right Checker down Split Vertical Out Wipe down Split Horizontal Out Current Storage Select the source of the images. Delete All Permanently delete all the data in selected memory source.
Annotation In single image playback mode or when the screen is frozen in camera mode, you can use the annotation feature to overlay straight line or freeform line on the captured image or still camera screen with the USB mouse connected to the USB port of AVerVision300AFHD. It comes with the following selections: Color Palette, Line Thickness, Line, Freehand, Capture, Eraser, and Hide/Show icons.
Transfer Captured Images/Videos to a computer This enables you to transfer the captured image from the built-in memory or SD to a computer. The instruction below MUST be read and followed BEFORE connecting the USB cable. 1. Make sure to set the USB switch to AVerVision300AFHD. for the computer to detect 2. MUST set the USB to PC as STORAGE before connecting the USB cable. 3. When “Mass Storage Start…” appears at the lower right corner of the presentation screen, you may now connect the USB cable. 4.
Lighting Lamp Type Embedded LED Lamp Input/Output RGB Input 15-Pins D-sub (VGA) RGB Output 15-Pins D-sub (VGA) HDMI Output HDMI CVBS/RS-232 Mini-DIN Jack (use CVBS/RS-232 Adapter cable) Composite Video RCA Jack USB USB2.0 DC 12V Input Power Jack MIC Phone Jack Speaker Phone Jack Dimension Operating 373mm x 174mm x 542mm (+/-2mm include rubber foot) Folded 367mm x 174mm x 99mm (+/-2mm include rubber foot) Weight 2 kg (about 4.
RS-232 Cable Specifications Make sure the RS-232 cable matches the cable specification design.
R S - 2 3 2 S e n d C o m m a n d Ta b l e Send Format︰0x52 + 0x0B + 0x03 + Data[0] + Data[1] + Data[2] + 0x53 + CheckSum*1 Receive Format︰0x53 + 0x00 + 0x02+ *2 + 0x00 + 0x52 + ReCheckSum*4 Abnormal Receive Format︰0x53 + 0x00 + 0x01 + *3 + 0x52 + ReCheckSum*5 xor : Exclusive-or operator *1 ：CheckSum = 0x0B xor 0x03 xor Data[0] xor Data[1] xor Data[2] xor 0x53 *2 ：Receive Success Check Code : 0x0B(Success Command)，0x03(Invalid Command) *3 ：Abnormal Receive Check Code : 0x01(Type Fail)，0x02(CheckSum Fail)，0x
Function Data[0] Data[1] Data[2] CheckSum PREVIEW MODE: MOTION 0x0A 0x02 0x00 0x53 PREVIEW MODE: MICROSCOPE 0x0A 0x03 0x00 0x52 PREVIEW MODE: MACRO 0x0A 0x04 0x00 0x55 PREVIEW MODE: INFINITE 0x0A 0x05 0x00 0x54 PREVIEW MODE CAPTURE 0x0B 0x00 0x00 0x50 PLAYBACK DELETE 0x0C 0x00 0x00 0x57 PLAYBACK FULL SCREEN 0x0D 0x00 0x00 0x56 MIRROR OFF 0x0E 0x00 0x00 0x55 MIRROR ON 0x0E 0x01 0x00 0x54 ROTATE 0 0x0F 0x00 0x00 0x54 ROTATE 90 0x0F 0x01 0x00 0x55 ROT
Function Data[0] Data[1] Data[2] CheckSum WHITE BALANCE RED INCREASE 0x17 0x00 0x00 0x4c WHITE BALANCE RED DECREASE 0x17 0x01 0x00 0x4d FLICKER: 50Hz 0x18 0x00 0x00 0x43 FLICKER: 60Hz 0x18 0x01 0x00 0x42 SPOTLIGHT: OFF 0x19 0x00 0x00 0x42 SPOTLIGHT: ON 0x19 0x01 0x00 0x43 SPOTLIGHT SHADE: 0% DARK 0x1A 0x00 0x00 0x41 SPOTLIGHT SHADE: 50% DARK 0x1A 0x01 0x00 0x40 SPOTLIGHT SHADE: 100% DARK 0x1A 0x02 0x00 0x43 SPOTLIGHT COLOR: RED 0x1B 0x00 0x00 0x40 SPOTL
Function Data[0] Data[1] Data[2] CheckSum RECORDING: OFF 0x23 0x00 0x00 0x78 RECORDING: ON 0x23 0x01 0x00 0x79 MOVIE FAST REWIND 0x25 0x00 0x00 0x7e MOVIE FAST FORWARD 0x25 0x01 0x00 0x7f MOVIE VOL INC 0x26 0x00 0x00 0x7d MOVIE VOL DEC 0x26 0x01 0x00 0x7c RECORDING QUALITY: NORMAL 0x27 0x00 0x00 0x7c RECORDING QUALITY: HIGH 0x27 0x01 0x00 0x7d STORAGE: EMBEDDED 0x28 0x00 0x00 0x73 STORAGE: SD CARD 0x28 0x01 0x00 0x72 STORAGE: THUMB DRIVE 0x28 0x02 0x
Function Data[0] Data[1] Data[2] CheckSum SLIDESHOW: OFF 0x34 0x00 0x00 0x6f SLIDESHOW: ON 0x34 0x01 0x00 0x6e SLIDESHOW EFFECT: EFFECT 0 0x35 0x00 0x00 0x6e SLIDESHOW EFFECT: EFFECT 1 0x35 0x01 0x00 0x6f SLIDESHOW EFFECT: EFFECT 2 0x35 0x02 0x00 0x6c SLIDESHOW EFFECT: EFFECT 3 0x35 0x03 0x00 0x6d SLIDESHOW EFFECT: EFFECT 4 0x35 0x04 0x00 0x6a SLIDESHOW EFFECT: EFFECT 5 0x35 0x05 0x00 0x6b AUTO IMAGE:OFF 0x36 0x00 0x00 0x6d AUTO IMAGE:ON 0x36 0x01 0x00 0
R S - 2 3 2 G e t C o m m a n d Ta b l e Send Format︰0x52 + 0x0A + 0x01 + Data[0] + 0x53 + CheckSum Receive Format︰0x53 + 0x0C + 0x01 + ReData[0] + 0x52 + ReCheckSum*1 xor : Exclusive-or operator *1 ：ReCheckSum = 0x0C xor 0x01 xor ReData[0] xor 0x52 *2 : Get Power Off Status Receive Format : 0x51 + 0xFF + 0x01 + 0x0A + 0x51 + 0xA5 Function Data[0] CheckSum RED VALUE 0x02 0x5A VALUE[ 0 ~ 255 ] BLUE VALUE 0x03 0x5B VALUE[ 0 ~ 255 ] POWER STATUS 0x04 0x5C OFF *2 1: ON LAMP STATUS 0x05 0x5D 0
Tr o u b l e s h o o t i n g This section provides many useful tips on how to solve common problems while using the AVerVision300AFHD. There is no picture on the presentation screen. 1. 2. 3. 4. Check all the connectors again as shown in this manual. Check the on/off switch of the display output device. Verify the setting of the display output device.
The presentation screen does not show the exact desktop image on my PC or Notebook after I toggle from Camera to PC mode. 1. Return to your PC or Notebook, place the mouse on the desktop and right click, choose “Properties”, choose “Setting” tab, click on “2” monitor and check the box “Extend my Windows desktop onto this monitor”. 2. Then go back one more time to your PC or Notebook and place the mouse on the desktop and right click again. 3.
L i m i t e d Wa r r a n t y For a period of time beginning on the date of purchase of the applicable product and extending as set forth in the “Warranty Period of AVer Product Purchased” section of the warranty card, AVer Information, Inc. (“AVer”) warrants that the applicable product (“Product”) substantially conforms to AVer’s documentation for the product and that its manufacture and components are free of defects in material and workmanship under normal use.
Limitation of Liability IN NO EVENT SHALL AVER BE LIABLE FOR INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, PUNITIVE, OR CONSEQUENTIAL DAMAGES OF ANY NATURE INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, DATA, REVENUE, PRODUCTION, OR USE, BUSINESS INTERRUPTION, OR PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES ARISING OUT OF OR IN CONNECTION WITH THIS LIMITED WARRANTY, OR THE USE OR PERFORMANCE OF ANY PRODUCT, WHETHER BASED ON CONTRACT OR TORT, INCLUDING NEGLIGENCE, OR ANY OTHER LEGAL THEORY, EVEN IF AVER HAS ADVI
