User's Manual

System Software —System Recovery
41
Partitioning the Hard Drive
Hard drive is not partitioned.
When the Microsoft Windows startup menu
appears, select (2) Go to MS-DOS PROMPT.
Press Enter to repartition your hard disk.
At the A:\ prompt, type fdisk and press Enter.
Note: If your computer is set to boot from the CD-
ROM drive, “A” refers to your CD-ROM.
If you see the message: “Do you wish to enable
large disk support (Y/N),” Select “Y.”
On the first screen select “Create DOS partition or
logical DOS drive.”
On the next screen select “Create Primary DOS
partition.” This will create the largest possible
partition as the C drive.
Then press “ESC” back to the first screen, and
select “2. Set active partition”. After finishing you
will see the question “Enter the number of the
partition you want to make active
… ” Please
continue with keyin “1”, then press ENTER.
After completing disk partitioning, press ESC to
exit fdisk.
Press <Alt>, <Ctrl>, and <Del> to reboot your
computer.
Follow steps under Recovering Windows.