User Manual

17
Name Function
(14) Full screen
View in full screen. To return, press the right button of the mouse or ESC on the
keyboard or click the arrow icon.
Click to exit from
full screen mode
When you switch to full screen in multiple-screen mode, Left click to toggle to only
display one of the video in the multiple-screen mode or all.
(15) Alarm
Alert and display warning info.
(16) WiFi Signal
Display the strength of the WiFi signal
(17) Virtual Keyboard
If the keyboard is not available, you may use the Virtual Keyboard.
2.3.1 Setting Up and Using the Emap
E-Map can hold up to 8 maps in *.jpg format. You may locate the camera, sensor and relay on
the map.
2.3.1.1 To Set Up the Emap
1. Click Emap.
2. When the Emap screen appears, click the area number (1 to 8 buttons) on where you want to
insert the map.
3. Click Load Map to insert the map. When the open dialog box appears, locate and select the
map and click Open.
4. When the inserted map appears on the Emap screen, click Edit. You may now drag the
camera, sensor, and relay icons to its place on the map. Icons on the map can be relocated
anywhere. If you are going to locate the icon on the map to other area, you need to drag the
icon to the black pane at the bottom of the Emap screen and then switch to the area on where
you want to locate the icon. To bring all the icons back to the black pane at the bottom of the
Emap screen, click Reset Icon.
5. When you are done, click Save button to save the new setting. To exit Emap screen, click
Close.