User Manual

26
record the video and preview it in playback mode.
- Enable Audio
Enable/disable audio of the camera.
- Show signal strength indicator
To display the Wi-Fi signal strength on surveillance screen.
- Name
Change the camera name
- Description
Add a short comment
(3) Switch to Advance Setup
Click to switch the setup mode to advance mode (see also Chapter 3.2
)
3.2 System Setup
In the System Setting dialog box, click OK to accept the new settings, click Cancel to exit without saving.
(1)
(2)
(3)
(4)
(5)
(6)
(8)
(9)
(10)
(11)
(7)
(1) Storage Path
Set the HDD on where to save the data. In case you have more than one storage device, the system
automatically saves the data to the next storage device. To insert another storage device, click Add and
select the storage path. To remove the selected path, click Delete.If the hard disk is the first time for DVR
system, please format the hard disk before starting to use it. To format the hard disk, select the hard disk
and Format Type, and then, click Format button.
(2) Delete recorded data after
If you want the system to automatically erase the data after a certain days, enable the Delete recorded
data after check box and enter the number of days in Days text box.
(3) Delete event and alarm log after
If you want the system to automatically erase the event and alarm log after a certain days, enable the
Delete event and alarm log after check box and enter the number of days in Days text box.
(4) Overwrite Enable
When there is not enough free space to record one hour data, the system automatically replaces the
oldest data.