User Guide

19
3.2.2 Scanning Channels (For Advanced Users)
1. Click Advance located in the lower right corner of the Program
Information section. Then the Advance Program Configuration
dialog box will appear.
2. When there are channels missing from the channel memory,
select All Frequencies or Single Frequency.
3. Once you select Single Frequency, you need to specify the
correct Frequency, for example 533000 (KHz), and Bandwidth.
4. Then click Scan.
5. After scanning, new active channels/programs will be
memorized and listed in the left pane of the dialog box.
6. Click Apply to save the scanned channels.
Note: All Frequencies Scanning may take you a while. Please be patient.
3.2.3 Customize Video Recording Settings
To customize the video recording settings, please do the following.
1. Click the Setup button and in the Setup dialog box, click the Digital TV icon on
the left pane.
2. Select the Record option.
3. Select recording type. By default, the application is set to record both audio and video
in MPEG
Ⅱ format. Or you can choose Audio Only for sound recording.
4. Click Apply to save the settings and click OK to exit the current dialog box. To abort
this operation, click Cancel.
Note: To determine the length of recording and to choose a destination folder in which
to save the recorded audio, please refer to the section titled Recording Settings
in Chapter 6.