User Guide

22
4. Click Program Scan and click Yes to continue the scanning process.
5. Available channels will then be listed in the Program Information and now you can
delete the unwanted programs by clearing the check box.
6. Click Apply to save the settings and click OK to exit the current dialog box. Or you
can click Cancel to revert to the original settings.
OR,
If you don’t want to scan programs every time you create a new channel group, you can
use the Copy function.
1. From the program drop-down list, select the group that you
want to duplicate.
2. Click Copy and the Program List dialog box will appear.
3. Type in desired name and click OK.
4. Finally, just like the steps described above, clear the check mark next to the
unwanted channels.
To delete a channel group:
1. Click the Setup button and in the Setup dialog box, click Analog TV or Digital
TV icon on the left pane.
2. From the program drop-down list, select the name of the group
that you want to remove.
3. Click Delete to remove the selected group.
3.4 Selecting a TV/Radio Channel
There are three ways of switching between TV/Radio channels:
◆Click the Channel Up/Down buttons (
on the TV monitor window or
on the Control Panel) repeatedly until reaching your desired channel.
◆Click
to open the Numeric Panel (as shown on the right).
Then click on the Numeric buttons to get your desired
channel number.
OR,
◆Click the Program List button . When the Program Panel appears, first
choose the desired group from the drop-down list and then double-click on
the desired channel.