User Guide

25
OR,
If you just want to skip a certain channel, do the following:
1. First, select the unwanted channel in the Program Information section.
2. Clear the Enable check box so that you will not access that channel when
you press Channel Up/Down buttons.
3. However, you can still see the channel in your program list. If you want to watch that
channel again at some point, just select the Enable check box.
3.9 Using the OverScan Function
On some broadcast channels, you might see
distorted lines or black spaces on the top, sides,
or bottom of the screen. These video artifacts
device from the source signal, and can be masked
using the OverScan feature.
To hide the edges of the picture:
z Right-click on the TV Monitor and choose
OverScan to have it enable it.
OR,
z Click the Setup button and in the
Setup dialog box, click Analog TV or
Digital TV icon on the left pane. Enable
Overscan and specify an appropriate number (0~20) to get better quality.
You can see the difference from the pictures below:
Before using OverScan function
After using OverScan function