Specifications

ENG-7

English Deutsch Français Italiano Español Português Русский

5 Setup and Upgrade

5.1 Setup for TV Mode

Please set the video source selector of

your TV to match the connection from

your AVerLife ExtremeVision Media Player

For example, if you use HDMI, set the TV

to use the correspondent HDMI input port.

START-UP PAGE

Check the TV display by going to “Setup” → “System Setup” → “TV Mode Setup”→

“Video Output”. The default display of AVerLife ExtremeVision Media Player is

Composite (CVBS).

NOTE: You can press “SETUP” button on the remote control to enter Setup Main

Menu. And use to select an item and press “OK” button to confirm the

selection.

If you use HDMI, use the remote control and press “OUTPUT” button. You can run

through the TV modes to get the correct display mode.

5.2 Wired Network Setup

1. Press “SETUP” button on the remote

control or select “SETUP” mode from

the Main Menu.

Select “Network Setup” → “IP Setup”,

and Enable DHCP or set your static IP

address according to your local

configuration.