User manual

16
3. Click Apply to save the settings.
4. Click Clear All to delete all definitions of the remote control or click Default to revert to the
factory setting.
3.11 Customize the Remote Control Source Button
On the Remote Source Control page, you may customize the remote control “Source” button to switch
on the selected item.
1. Click the Setup button
and in the Setup dialog box, click on the Remote Remapping→
Remote Source Control icon on the left pane.
2. Select the signal source that you want.
3. Click the
UP or DOWN button at the right side until the selected signal reaches the
location you desire.
4. Click Apply to save the settings. Or click Default to revert to the factory setting.