User manual

42
2. Click New and the Program List dialog box will appear. Type in the desirable name and
click OK.
Note: The system will assign a default name (FM-Radio) if you don’t create a new program
list before scanning.
3. Click Scan. All active channels will be automatically scanned and memorized.
4. To terminate the scanning, click Stop.
5. Click Apply to save the setting and click OK to exit the current dialog box. To abort the
setting, click Cancel.
5.3 Manually Scanning Specific FM Channels
Instead of scanning all channels, you can choose to manually scan one or a few channels only.
To do this, follow these procedures.
To manually rescan specific FM radio channels:
1. Click the Setup button
and in the Setup dialog box, click FM Radio icon on the left
pane.
2. Enter the channel frequency that you want to start scanning in the text box.
3. Select 0.01 MHz, 0.05MHz or 0.1MHz as your tuning increment.
4. Click
to scan upward or to scan downward from the selected channel frequency.
The scanning will stop when the application finds the closest ACTIVE FM frequency.
5. Or click
or to increase/decrease the frequency to search your preferred channel.
6. Click the Modify button if you’d like to keep the newly scanned frequency.
5.4 Selecting a Channel
To select a channel:
1. Click
to open the Numeric Panel.
‧ Click on the Numeric buttons to select a channel.
‧ Click the Channel Up/Down button repeatedly until reaching your desired channel.
OR,
2. Use the numeric keys on your keyboard to select a channel.