User manual

56
• If you want to set your own image size, select Customize and enter the image
Width and Height. If you want to maintain relative width and height, select the
Keep Ratio option. Choose a measurement unit from the Unit drop-down list.
You can specify any image size you want. The maximum capture size can be
1600×1200.
6. Click OK to save the image. Click Cancel if you do not want to save the image.
8.3 Multiple Image Sequence Capture
To capture a continuous sequence of images, do the following:
1. Click the Setup button
. In the Setup dialog box, click the Snapshot icon on the
left pane.
2. In the Number of Pictures box, specify the number of images you want to capture.
3. In the Interval Time box, specify the interval between captures. For instance, if you
specify 10 seconds, an image will be captured every 10 seconds.
4. On this page, you can choose the file format and destination folder, file name format
and image resolution in advance.
5. Click Apply to save the new settings and click OK to exit the current dialog box. Or
Click Cancel if you do not want to change the settings.
6. Click the Snapshot button
on the Control Panel to start capturing.