User Guide

AVerTV 6

4.2.2 Scanning channels (Adding Frequencies Manually)

You can add new frequencies one by one if you do not want to import any existing

satellite channel data.

1. Click the Setup button

and in the Setup dialog box, select an available

AVerMedia device in the left pane.

Note:

Make sure that your Country/Region is correct.

a First, select an available Avermedia device in the left pane.

b From the Region/Country drop-down list, select your country or region.

c Click Apply to save the settings.

(This picture is only for reference.)

2. Then select Digital TV.

3. Click Edit next to the satellite name where you want to add new frequencies. The

Satellite Information dialog box will appear.

4. Specify the correct frequency, FEC, symbol rate, and polarization.

5. Click Insert.

6. Repeat steps 1 to 4 if you want to add more frequencies.

7. Then check your LNB’s configurations. Please refer to 3.2.2 Scanning for Digital

Satellite Programs for more information.